Please contact us for a competitive professional Power Flush quote
01924 457913
Prices start from £260
We offer a new installation power flush service at a reduced rate for installers of heating systems and new boilers. Contact us for details
Power Flushing
Power Flushing Symptoms
-
Heating Slow to warm up
-
Radiators need frequent bleeding
-
System and Boiler noise
-
Completely or partially cold radiators
-
Repeated central heating pump failures
-
Black stains on radiator indicate pin hole leaks
-
Radiator water black when bleeding
Unpleasant boiler noises
Power Flushing F.A.Q
How long does Power Flushing Take?
Power Flushing is normally completed in one day but in most cases the process takes five hours.**
How much does it cost?
Prices start from £330
Can Power Flushing cause leaks?
Power Flushing doesn’t cause leaks but occasionally during the process of removing debris from within the system small pin holes can be uncovered. We can quote for repairs and often repair the same day. It is much safer to have a leak in a controlled environment with an engineer present rather than find a leak in the morning or after you return from holiday.
I’m having a new boiler fitted, do I need a Power Flush?
Some boiler manufactures insist that old heating systems be thoroughly flushed before installing a new boiler and may even make it a term of the warranty. This standard can only be met by Power Flushing.
I have a service contract for my Central Heating System, Will this include Power Flushing?
You should check with your service provider but in the majority of cases these contracts do not cover Power Flushing.
Why should I choose PPS Plumbing Services Ltd to Power Flush my Heating System?
We offer an excellent service and value for money, we complete Power Flushing to the highest standard and in some cases charge 50% less than some national companies.
Is your free Power Flushing system check a sales pitch?
Not at all, We will carry out a visual check of your system , provide a quote and answer any questions. If you would like to continue with the Power Flush then call us to book a suitable date.
|
Scroll Down to see special offers
If your central heating system suffers from any of the following symptoms then it can benefit from a Power Flush from PPS Plumbing Services.
|
System slow to heat up
Radiators need frequent bleeding
Noisy central heating pump
Sludge in Feed & Expansion Tank
Repeated pump failure
|
Radiator full blocked and Cold
Partially cold radiators
Leaking or corroded radiators
Leaking pipe work and unions
Dirty Black water in radiators
|
 |
How Does Power Flushing work |
 The power flushing pump is simply connected in to the heating system, either across standard circulator pump couplings, across the tails of one radiator, or wherever most practicable. The powerful flow, combined with instantaneous flow reverser device, will dislodge and mobilise deposits and corrosion which resist traditional system cleaning methods.
Once the corrosion and sludge deposits have been loosened and mobilised, fresh clean water is then forced through the heating system, pushing the contaminated water out through a full bore dump valve to waste. During the process , radiators are individually flushed, without removing or disconnection from the system, by directing the full output of the pump through each radiator separately.
At the end of the flushing process, the system contains fresh clean water and reinstatement of the system to normal operation takes only a few minutes.
|
West, South, East, West Yorkshire. Batley, Dewsbury, Ossett, Mirfield, Wakefield, Barnsley, Leeds, Bradford, Morley, Huddersfield, Halifax, Sheffield, Rotherham, Doncaster, Pontefract, Castleford, Selby, Goole, Harrogate, Wetherby, York |
 Does your heating system, suffer from circulation and boiler noise?
If it does the probable cause is sludge and corrosion deposits inside your system.
How do you clean your system and remove the sludge and corrosion deposits?
The answer is power flushing.
What is power flushing?
Power flushing is a process which uses water at high velocity but low pressure, (so that no physical damage is caused to the system) to safely remove these deposits and return your heating system to optimum working. The process can be made even more effective by using powerful cleaning agents such as FX2 or HYPER-FLUSH
Fitting a new system?
Power flushing in conjunction with SYSTEM PRE-CLEAN removes all flux, swarf and other debris, giving your heating system the best start in life.
Fitting a new boiler?
Today’s modern boilers, developed to minimise fuel costs and pollution, are more likely to develop problems caused by debris in the water. Power flushing the system before fitting a new boiler removes all the sludge and debris, which if left in the system can accumulate in the heat exchanger of the new boiler causing noisy operation, reduced efficiency and reduce the life of your new boiler.
Special Offers
Offer Ends 30/11/09
Unvented Systems (Combi boilers)
Includes:
Up to 8 radiators, boiler, all pipe work cleaned.
All chemicals, system inhibitor, radiator balancing after flushing.
More than 8 radiators? Just add £20 per extra radiator.
 Including VAT (was £380)
--------------------------------------------------------------------------------------------------------
Vented Systems (cold water tank in the loft)
Includes:
Up to 8 radiators, boiler, all pipe work and expansion tank cleaned.
All chemicals, system inhibitor, radiators balancing after flushing.
More than 8 radiators? Just add £20 per extra radiator.
 Including Vat (was £400)
---------------------------------------------------------------------------------------------------------
Micro bore systems (small 8 or 10 mm radiator pipes)
Includes:
Up to 8 radiators, boiler, all pipe work and expansion tank cleaned.
All chemicals, system inhibitor, radiators balancing after flushing.
More than 8 radiators? Just add £25 per extra radiator.
 Including Vat (was £440)
MagnaClean Filters
From the moment a central heating system is installed the radiators begin to corrode. By installing a magna clean filter to your system all the rust particles are collected at one point which can easily be cleaned. Simply remove the filter and clean.
Magnaclean filters fitted from £125plus Vat (when fitted while having a power flush)
Price Promise
If you find a genuine like for like quote using the same equipment and chemicals then we will aim to beat it.
---------------------------------------------------------------------------------------------------------
|
